Inleiding

This guide will help users be able to remove the backboard, as well as detach the motherboard, and finally remove the old speaker to be able to replace it with the new speaker.

Onderdelen

Geen onderdelen nodig.

Remove the four 0.8mm Phillips # 00 screws from the back board using the screwdriver from your tool kit.
  • Remove the four 0.8mm Phillips # 00 screws from the back board using the screwdriver from your tool kit.

Voeg opmerking toe

Once  the backboard is removed, remove the four screws on the motherboard. Two on top of the motherboard and two on the bottom of the motherboard using the Phillips screwdriver.
  • Once the backboard is removed, remove the four screws on the motherboard. Two on top of the motherboard and two on the bottom of the motherboard using the Phillips screwdriver.

Voeg opmerking toe

  • Detach the two pairs of wires, found on the top right of the motherboard, from their combs using the tweezers from the toolkit.

Voeg opmerking toe

  • In order to get to the speaker, try to free the motherboard by removing all the wires from their combs using the tweezers.

Voeg opmerking toe

  • Use tweezers to remove wires from combs.

Voeg opmerking toe

  • Use your tweezers to free wire from comb in order to free the motherboard.

Voeg opmerking toe

  • Once you have all the wires freed from the combs, you can detach the motherboard just by lifting it out of place.

Voeg opmerking toe

  • Unscrew the two Phillips #00 screws to get the speaker loose using a Phillips screwdriver. The screws measure 0.3 mm in length.

Voeg opmerking toe

  • Once the two screws that hold the speaker in place are removed, remove the speaker using tweezers.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Sedina Cavcic

Lid sinds: 05-09-14

371 Reputatie

3 handleidingen geschreven

Team

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 155