Repareer je spullen Recht op reparatie Winkel

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Compaq Evo N1000v Top Cover Replacement

Geschreven door: Alex Hernandez (en 3 andere bijdragers)
  • Reacties: 0
  • Favorieten: 0

Moeilijkheid

Gemiddeld

Stappen

27

Tijd vereist

Stel een tijd voor??

Secties

5

Markeringen

7

Missing Prerequisites

Ontbrekende vereisten

Deze handleiding heeft ontbrekende informatie over het starten van het proces. Maak een handleiding met de vereiste stappen!

Confusing Text

Verwarrende Tekst

Een deel van de tekst in deze handleiding is verwarrend, dubbelop of naast de kwestie. Bewerk de tekst en maak hem duidelijker!

Markup Mishap

Mislukte opmaak

Deze handleiding heeft een betere opmaak nodig. Help mee door het corrigeren van de opmaak of door aantekeningen te maken.

Action Shots

Actiemomenten

Wees een actieheld! Deze handleiding heeft plaatjes nodig die beter tonen hoe specifieke handelingen uitgevoerd moeten worden.

Missed a Step

Stap gemist

Oeps! Deze handleiding mist nu een paar belangrijke stappen.

Inconsistent Images

Inconsistente plaatjes

Deze handleiding zou veel cooler worden met foto's zoals het hoort (zie vereisten).

Needs Better Images

Heeft betere plaatjes nodig

Betere foto's zullen deze handleiding verbeteren. Help mee door het nemen, bewerken of uploaden van nieuwe foto's!

Inleiding

A guide on how to remove the Top Cover.

  1. Turn the laptop bottom side up with the rear panel facing forward.

    • Turn the laptop bottom side up with the rear panel facing forward.

    Vertaal

  2. Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

    • Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

    Vertaal

  3. Turn the laptop top side up with the front facing forward. Open the screen.

    • Turn the laptop top side up with the front facing forward. Open the screen.

    Vertaal

  4. Locate the F1 and F2 keys near the top left corner of the keyboard.

    • Locate the F1 and F2 keys near the top left corner of the keyboard.

    Vertaal

  5. While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Vertaal

  6. Locate the Pause and Scroll keys near the top right corner of the keyboard.

    • Locate the Pause and Scroll keys near the top right corner of the keyboard.

    Vertaal

  7. While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    • While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Vertaal

  8. Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover. Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

    Vertaal

  9. Lift the back edge of the keyboard and pull towards the screen.

    • Lift the back edge of the keyboard and pull towards the screen.

    Vertaal

  11. Pull the cable and lift up to release.

    • Pull the cable and lift up to release.

    Vertaal

  12. Remove the keyboard.

    • Remove the keyboard.

    Vertaal

  13. Locate the fan near the top left corner. It has three colored wires: yellow, red, and black.

    • Locate the fan near the top left corner. It has three colored wires: yellow, red, and black.

    • Disconnect the cable connecting the fan to the system board.

    Vertaal

  14. Locate and remove the four screws in the copper plate.

    • Locate and remove the four screws in the copper plate.

    Vertaal

  15. Remove the heat spreader by pulling the whole assembly up out of the computer.

    • Remove the heat spreader by pulling the whole assembly up out of the computer.

    Vertaal

  16. Flip the computer bottom side up with the rear facing forward.

    • Flip the computer bottom side up with the rear facing forward.

    Vertaal

  17. Remove the six screws shown in picture.

    • Remove the six screws shown in picture.

    Vertaal

  18. Remove battery and then remove screw in metal support on case edge

    • Remove battery and then remove screw in metal support on case edge

    • Flip the computer top side up with the front facing you.

    Vertaal

  19. Lift up the palm rest from the front edge and swing it towards the screen.

    • Lift up the palm rest from the front edge and swing it towards the screen.

    Vertaal

  20. Locate the first connector. Disconnect by firmly pulling up.

    • Locate the first connector. Disconnect by firmly pulling up.

    Vertaal

  21. Locate the second connector. Remove by firmly pulling up.

    • Locate the second connector. Remove by firmly pulling up.

    Vertaal

  22. Remove the palm rest.

    • Remove the palm rest.

    Vertaal

  23. Turn the base bottom side up.

    • Turn the base bottom side up.

    Vertaal

  24. Remove the two TM 2.5mm x 8.0mm screws that secure the top cover to the base.

    • Remove the two TM 2.5mm x 8.0mm screws that secure the top cover to the base.

    Vertaal

  25. Turn the base top side up with the front facing forward.

    • Turn the base top side up with the front facing forward.

    Vertaal

  26. Remove the three TM 2.5 mm x 5.0 mm screws that secure the top cover to the base.

    • Remove the three TM 2.5 mm x 5.0 mm screws that secure the top cover to the base.

    Vertaal

  27. Lift the top cover straight up about one inch, then slide forward until the microphone cable is exposed.

    • Lift the top cover straight up about one inch, then slide forward until the microphone cable is exposed.

    • Disconnect the microphone cable from the system board.

    Vertaal

  28. Remove the top cover from the base.

    • Remove the top cover from the base.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Alex Hernandez

Lid sinds: 14-04-10

46 Reputatie

4 handleidingen geschreven

Badges: 8

+5 andere badges

Team

Cal Poly, Team 29-74, Johann Spring 2010 Lid van Cal Poly, Team 29-74, Johann Spring 2010

CPSU-JOHANN-S10S29G74

3 Leden

7 handleidingen geschreven

0 Opmerkingen

Voeg een opmerking toe

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 2,942