Repareer je spullen

Recht op reparatie

Winkel

Compaq Evo N1000v LED Cover Replacement

Geschreven door: kim (en 6 andere bijdragers)
  • Reacties: 0
  • Favorieten: 0

Moeilijkheid

Eenvoudig

Stappen

8

Tijd vereist

5 minuten

Secties

1

Markeringen

1

Missing Prerequisites

Ontbrekende vereisten

Deze handleiding heeft ontbrekende informatie over het starten van het proces. Maak een handleiding met de vereiste stappen!

Inleiding

A guide on how to remove the LED Cover.

Gereedschap

Koop deze gereedschappen

Onderdelen

Geen onderdelen opgegeven.

  1. Turn the laptop bottom side up with the rear panel facing forward.

    • Turn the laptop bottom side up with the rear panel facing forward.

    Vertaal

  2. Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

    • Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

    Vertaal

  3. Turn the laptop top side up with the front facing forward. Open the screen.

    • Turn the laptop top side up with the front facing forward. Open the screen.

    Vertaal

  5. Locate the F1 and F2 keys near the top left corner of the keyboard.

    • Locate the F1 and F2 keys near the top left corner of the keyboard.

    Vertaal

  6. While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Vertaal

  7. Locate the Pause and Scroll keys near the top right corner of the keyboard.

    • Locate the Pause and Scroll keys near the top right corner of the keyboard.

    Vertaal

  8. While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    • While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Vertaal

  9. Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover. Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 6 andere bijdragers

kim

Lid sinds: 14-04-10

59 Reputatie

3 handleidingen geschreven

Badges: 8

+5 andere badges

Team

Cal Poly, Team 29-74, Johann Spring 2010 Lid van Cal Poly, Team 29-74, Johann Spring 2010

CPSU-JOHANN-S10S29G74

3 Leden

7 handleidingen geschreven

0 Opmerkingen

Voeg een opmerking toe

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 2,534