Inleiding

You will need to assemble the proper tools shown in the first step of this guide before you continue forward.

This guide is meant to assist the reader with the proper steps to remove and replace the floppy drive of the Compaq Evo N1000v device.

Onderdelen

Geen onderdelen nodig.

Remove the 6 screws as shown in the photo.
  • Remove the 6 screws as shown in the photo.

Voeg opmerking toe

Push the front of the laptop upwards as the photo shows.
  • Push the front of the laptop upwards as the photo shows.

Voeg opmerking toe

Rest the front end piece on the keyboard area.
  • Rest the front end piece on the keyboard area.

Voeg opmerking toe

Squeeze and pull up on the left and right sides of the floppy drive cable to unlock it.
  • Squeeze and pull up on the left and right sides of the floppy drive cable to unlock it.

Voeg opmerking toe

Use the tweezers is gently pull the cable from the locking mechanism.
  • Use the tweezers is gently pull the cable from the locking mechanism.

Voeg opmerking toe

Unscrew the 4 screws as shown in the photo.
  • Unscrew the 4 screws as shown in the photo.

Voeg opmerking toe

Remove the floppy drive.
  • Remove the floppy drive.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

ryan

Lid sinds: 12-03-14

470 Reputatie

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 3

Altijd: 189