Ga door naar hoofdinhoud

Inleiding

The purpose of this guide is to give step-by-step instruction on how to replace the motherboard on a ColecoVision.

Onderdelen

Geen onderdelen opgegeven.

  1. Start by laying the console face down.
    • Start by laying the console face down.

    • Remove the eight 15mm Phillips #1 screws from the bottom of the device.

  2. Flip the console back over. Lift the front panel off. I would reccomended using a metal spudger along the rim of the top to safely remove it and set it aside.
    • Flip the console back over.

    • Lift the front panel off. I would reccomended using a metal spudger along the rim of the top to safely remove it and set it aside.

  3. iPhone Batterij Fix Kits

    Slechts $29.99

    Buy Now

    iPhone Batterij Fix Kits

    Slechts $29.99

    Buy Now
  4. Remove the two 15mm Phillips #1 screws holding the casing in place. Carefully lift the casing from the motherboard.
    • Remove the two 15mm Phillips #1 screws holding the casing in place.

    • Carefully lift the casing from the motherboard.

  5. Remove the center Phillips #1 screw near the cartridge slot.
    • Remove the center Phillips #1 screw near the cartridge slot.

    • Remove the second Phillips #1 screw near the RAM chips.

    • Carefully lift and remove the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Krystalina

Lid sinds: 24-10-18

121 Reputatie

1 Handleiding geschreven

Team

UW Tacoma, Team S1-G2, Rose Fall 2018 Lid van UW Tacoma, Team S1-G2, Rose Fall 2018

UWT-ROSE-F18S1G2

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 12

Altijd: 174