Inleiding

Use this guide to clean the function buttons.

Gereedschap

Onderdelen

Geen onderdelen nodig.

  1. Remove wrist strap and battery.
    • Remove wrist strap and battery.

    Voeg opmerking toe

  2. Remove 2 screws from each side of the camera (4 total, 0.102 in).
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

    Voeg opmerking toe

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

    Voeg opmerking toe

    • The cases should now be removed.

    This can be a bit tricky when reassembling. All of the little tabs around the edge need to snap into their proper places, and there are three cover pieces to manage. Plus, you need to make sure that the camera/video/playback switch is properly engaged with its slider on the circuit board, otherwise you'll need to raise the back panel and reposition everything again.

    Craig Bonsignore - Antwoord

    oh yes , i agree lol

    elbala80 -

    • Clean around the function buttons with a cotton swab dipped in isopropyl alcohol.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Tyler Grossheim

Lid sinds: 25-01-11

1.359 Reputatie

6 handleidingen geschreven

Team

Cal Poly, Team 3-32, Regan Winter 2011 Lid van Cal Poly, Team 3-32, Regan Winter 2011

CPSU-REGAN-W11S3G32

3 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,818