Repareer je spullen Gemeenschap Winkel

Cleaning Debris from Flywheel Screen

Inleiding

Due to the nature of lawn mowers, over time large amounts of debris and grass cuttings accumulate and can harm the engine's performance.

Wat je nodig hebt

  1. Cleaning Debris from Flywheel Screen, Cleaning Debris from Flywheel Screen: stap 1, afbeelding 1 van 3 Cleaning Debris from Flywheel Screen, Cleaning Debris from Flywheel Screen: stap 1, afbeelding 2 van 3 Cleaning Debris from Flywheel Screen, Cleaning Debris from Flywheel Screen: stap 1, afbeelding 3 van 3

    • Ensure the engine is off and cooled down before starting this guide.

    • Using a 5/16" socket or wrench, remove the three bolts holding the plastic cover on to the engine.

    • Lift away the plastic cover. Note that the starter is attached to the cover and will come off with it.

    Bewerken

  3. Cleaning Debris from Flywheel Screen: stap 2, afbeelding 1 van 2 Cleaning Debris from Flywheel Screen: stap 2, afbeelding 2 van 2

    • Using compressed air or a rag, clean debris from the flywheel.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 4 andere bijdragers

Ethan Narad

Lid sinds: 04/19/18

529 Reputatie

3 handleidingen geschreven

Medailles: 10

+7 andere badges

Team

Cal Poly, Team S25-G15, Maness Spring 2018 Lid van Cal Poly, Team S25-G15, Maness Spring 2018

CPSU-MANESS-S18S25G15

4 Leden

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 30

Altijd: 905