Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

This guide shows how to replace the Chumby One speaker.

  1. Remove 4 self-adhesive plastic dots covering the screw holes.
    • Remove 4 self-adhesive plastic dots covering the screw holes.

  2. Remove the four 2mm screws with a Phillips screwdriver.
    • Remove the four 2mm screws with a Phillips screwdriver.

  3. Remove the back and bottom cover.
    • Remove the back and bottom cover.

  4. Disconnect the battery connector from the motherboard with a plastic opening tool.
    • Disconnect the battery connector from the motherboard with a plastic opening tool.

  5. Nintendo Switch-kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch-kits

    A quick fix to get back in the game

    Shop Switch Kits
  6. Disconnect the microphone connector from the motherboard with a plastic opening tool.
    • Disconnect the microphone connector from the motherboard with a plastic opening tool.

  7. Remove the display ribbon cable from its socket with a plastic opening tool.
    • Remove the display ribbon cable from its socket with a plastic opening tool.

  8. Remove the volume knob from the side of the Chumby One with a plastic opening tool.
    • Remove the volume knob from the side of the Chumby One with a plastic opening tool.

  9. Remove the four 6mm screws using a PH000 bit on the inner chassis.
    • Remove the four 6mm screws using a PH000 bit on the inner chassis.

  10. Remove the inner components from the outer shell.
    • Remove the inner components from the outer shell.

  11. Remove the speaker wire connector from the motherboard.
    • Remove the speaker wire connector from the motherboard.

  12. Remove the four 5mm screws on the speaker base with a Phillips PH00 screwdriver bit. Remove the four 5mm screws on the speaker base with a Phillips PH00 screwdriver bit.
    • Remove the four 5mm screws on the speaker base with a Phillips PH00 screwdriver bit.

  13. Remove the speaker.
    • Remove the speaker.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Jordan Houchins

Lid sinds: 27-03-17

401 Reputatie

4 handleidingen geschreven

Team

IUPUI, Team S3-G3, Baechle Spring 2017 Lid van IUPUI, Team S3-G3, Baechle Spring 2017

IUPUI-BAECHLE-S17S3G3

4 Leden

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 74