Inleiding

When the camera will not turn on it is possible that the battery has lost charge. This guide will show how to locate and remove the battery so that it can be charged.

  1. Orient the camera with the lens facing to the right and the bottom of the camera facing up towards you.
    • Orient the camera with the lens facing to the right and the bottom of the camera facing up towards you.

    • Grasping the camera tightly, press downward firmly on the piece with the label and slide it to the left (towards the LCD screen).

    • The flap will then swing upward.

    Voeg opmerking toe

  2. Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK bij het afrekenen
    Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK
  3. With the battery now exposed, pull the dark gray tab away from the battery.
    • With the battery now exposed, pull the dark gray tab away from the battery.

    • The battery is no longer secured in the camera.

    Voeg opmerking toe

    • Firmly grasp each side of the battery and pull it out of its compartment.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Jenn Eberts

Lid sinds: 10-04-12

221 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 17-28, Amido Spring 2012 Lid van Cal Poly, Team 17-28, Amido Spring 2012

CPSU-AMIDO-S12S17G28

4 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 8

Afgelopen 30 Dagen: 22

Altijd: 2,305