Ga door naar hoofdinhoud

Inleiding

This guide shows how to remove the front case from the rest of the Casio Exilim EX Z55 camera. You may have to do this to replace a damaged front cover or to access the inner parts of the camera.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove eight 1.8 mm screws from the left and right sides of the camera using a Phillips #00 screwdriver Remove eight 1.8 mm screws from the left and right sides of the camera using a Phillips #00 screwdriver Remove eight 1.8 mm screws from the left and right sides of the camera using a Phillips #00 screwdriver
    • Remove eight 1.8 mm screws from the left and right sides of the camera using a Phillips #00 screwdriver

  2. Remove the four 3.7 mm screws from the bottom of the camera using a Phillips #00 screwdriver.
    • Remove the four 3.7 mm screws from the bottom of the camera using a Phillips #00 screwdriver.

  3. Separate the front case from the body of the camera.
    • Separate the front case from the body of the camera.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Patrick Stalwick

Lid sinds: 18-04-12

118 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 9-45, Regan Spring 2012 Lid van Cal Poly, Team 9-45, Regan Spring 2012

CPSU-REGAN-S12S9G45

7 Leden

12 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 384