Ga door naar hoofdinhoud

Carburetor Disassembly

Wat je nodig hebt

  1. Carburetor Disassembly, Remove air filter + housing: stap 1, afbeelding 1 van 3 Carburetor Disassembly, Remove air filter + housing: stap 1, afbeelding 2 van 3 Carburetor Disassembly, Remove air filter + housing: stap 1, afbeelding 3 van 3
    • Use a 5/16 socket or flat head screwdriver to remove the first bolt. Pull the cover off and remove the air filter.

    • Remove the 3 bolts using a 5/16 socket. In addition, pull the breather hose off the assembly at the bottom left. Now pull the cover off.

  2. Carburetor Disassembly, Remove carburetor: stap 2, afbeelding 1 van 3 Carburetor Disassembly, Remove carburetor: stap 2, afbeelding 2 van 3 Carburetor Disassembly, Remove carburetor: stap 2, afbeelding 3 van 3
    • Remove the two bolts holding the carburetor to the engine with a 3/8 socket or wrench.

    • Remove the spring boxed in red from the hole. Pull to left of carburetor, towards the link the other end of the spring is around.

    • The link will be connected to the carburetor. Pull the carburetor off in an "S" motion and remove it.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Jacob Micallef

Lid sinds: 03/06/17

993 Reputatie

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 37

Altijd: 1,105