Ga door naar hoofdinhoud

Canon PowerShot SD400 LCD Replacement

Wat je nodig hebt

  1. Canon PowerShot SD400 LCD Replacement, LCD: stap 1, afbeelding 1 van 3 Canon PowerShot SD400 LCD Replacement, LCD: stap 1, afbeelding 2 van 3 Canon PowerShot SD400 LCD Replacement, LCD: stap 1, afbeelding 3 van 3
    • Locate the 6 screws that you must remove to open the camera housing.

    • There are 2 screws on the bottom and 2 screws on each side

  2. Canon PowerShot SD400 LCD Replacement: stap 2, afbeelding 1 van 3 Canon PowerShot SD400 LCD Replacement: stap 2, afbeelding 2 van 3 Canon PowerShot SD400 LCD Replacement: stap 2, afbeelding 3 van 3
    • Using the screwdriver, carefully remove the exterior screws and set them aside to avoid misplacing them.

  3. Canon PowerShot SD400 LCD Replacement: stap 3, afbeelding 1 van 2 Canon PowerShot SD400 LCD Replacement: stap 3, afbeelding 2 van 2
    • Locate the interior screw to the top right of the screen.

    • Remove the screw using the screwdriver.

  4. Canon PowerShot SD400 LCD Replacement: stap 4, afbeelding 1 van 3 Canon PowerShot SD400 LCD Replacement: stap 4, afbeelding 2 van 3 Canon PowerShot SD400 LCD Replacement: stap 4, afbeelding 3 van 3
    • Insert the flat-head screwdriver under the LCD screen into the two clips.

    • Lift the LCD screen.

    • Potential for device damage Lift the screen gently and be careful not to rip the screen off.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Yi Huang Ke

Lid sinds: 10/18/11

51 Reputatie

4 handleidingen geschreven

Team

James Madison, Team 1-1, Allen Fall 2011 Lid van James Madison, Team 1-1, Allen Fall 2011

JMU-ALLEN-F11S1G1

4 Leden

4 handleidingen geschreven

Één opmerking

Do you carry a lcd screen for the Powershot sd400?

Jesus Licon - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 15

Altijd: 3,004