Onderdelen

Geen onderdelen nodig.

Remove the two screws from the side panel closest to the camera lens.
  • Remove the two screws from the side panel closest to the camera lens.

  • Note: These screws are 2.9 mm long.

Voeg opmerking toe

Remove the two screws from the camera bottom panel.
  • Remove the two screws from the camera bottom panel.

  • Note: These screws are 2.9 mm long.

Voeg opmerking toe

  • Remove the 2 screws from the side panel farthest from the lens.

  • Note: These screws are 2.9 mm long.

Voeg opmerking toe

  • Pull the back panel away from the camera body, starting at the end with the function buttons.

Voeg opmerking toe

  • Remove the small cover panel and attached wrist strap mount.

Voeg opmerking toe

  • Remove the front cover by gently pulling it away from the camera body.

Voeg opmerking toe

  • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

Voeg opmerking toe

  • Using the spudger, take off the shutter button by prying the small tab on the front side of the camera.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Phillip Phung

Lid sinds: 19-01-12

486 Reputatie

9 handleidingen geschreven

Team

Cal Poly, Team 8-18, Maness Winter 2012 Lid van Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 891