Repareer je spullen Gemeenschap Winkel

Canon PowerShot A590 IS Clock Battery Replacement

Inleiding

Locate and remove the clock battery from the camera.

Wat je nodig hebt

  1. Canon PowerShot A590 IS Clock Battery Replacement, Batteries: stap 1, afbeelding 1 van 2 Canon PowerShot A590 IS Clock Battery Replacement, Batteries: stap 1, afbeelding 2 van 2

    • The battery hatch is on the bottom of the camera.

    • CAUTION: Locate the switch to open the hatch and push gently toward the front of the camera. Too much force can break the hatch.

    • While the switch is pushed forward, pull the cover away from the camera.

    Bewerken

  2. Canon PowerShot A590 IS Clock Battery Replacement: stap 2, afbeelding 1 van 1

    • This camera requires AA batteries.

    • To remove batteries, simply allow them to fall out of the camera.

    • Use a fingernail to lift the clock battery out of the camera.

    Bewerken

  3. Canon PowerShot A590 IS Clock Battery Replacement: stap 3, afbeelding 1 van 1

    • When replacing the AA batteries, verify they are oriented correctly by following the (+) and (-) signs on the camera.

    Bewerken

  5. Canon PowerShot A590 IS Clock Battery Replacement, Locate Clock Battery: stap 4, afbeelding 1 van 1

    • To access the clock battery, find the clock battery cover, shown here in the red square.

    Bewerken

  6. Canon PowerShot A590 IS Clock Battery Replacement, Remove Battery Tab: stap 5, afbeelding 1 van 1

    • When accessing the clock battery, use a fingernail or similar small instrument to gently pull the tab out.

    Bewerken

  7. Canon PowerShot A590 IS Clock Battery Replacement, Remove Battery from Tab: stap 6, afbeelding 1 van 1

    • Now that you have the tab and battery removed, use a fingernail or other small tool to remove the battery from the tab.

    • This battery is a CR1220 type watch battery.

    Bewerken

  8. Canon PowerShot A590 IS Clock Battery Replacement, Replacing Clock Battery: stap 7, afbeelding 1 van 1

    • When replacing the clock battery, be sure to have the battery oriented properly, as shown in the picture.

    • Remember, the tab goes in with the exposed side of the battery facing towards the lens.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

13 andere personen hebben deze handleiding voltooid.

Auteur

met 4 andere bijdragers

Matt Wolfe

Lid sinds: 10/11/10

405 Reputatie

1 Handleiding geschreven

Medailles: 11

+8 andere badges

Team

Cal Poly, Team 9-19, Regan Fall 2010 Lid van Cal Poly, Team 9-19, Regan Fall 2010

CPSU-REGAN-F10S9G19

4 Leden

14 handleidingen geschreven

9 opmerkingen

thanks its very useful forme

srikrishnan2003 - Antwoord

thank you, very useful for my old camera :)

agungsp2000 - Antwoord

Perfect! I never even knew I had this battery in there. Couldn't figure out why the date and time wouldn't stay set every time I shut it off. And then I found the answer here.

Thank you very much for the post!

sherlock261 - Antwoord

I'm a senior citizen and am not very good with modern technology. Been going crazy trying to set my clock in my digital camera. I didn't want to buy a new one because I have had this one for years (Power Shot A590) and didn't want to have to learn to use a newer one. Finally got smart enough to do a google search for an answer. Will get a new battery tomorrow and solve my problem. Thanks for the help!...the information age is good for something after all.

Pat Solomon - Antwoord

Wow this is a great site. I got the answer I needed right away. The instructions were clear, simple and correct. Thank you.

You are bookmarked.

jeffrey wales - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 21

Afgelopen 30 dagen: 129

Altijd: 14,588