Ga door naar hoofdinhoud

Canon PowerShot A460 Motherboard Replacement

Wat je nodig hebt

  1. Canon PowerShot A460 Motherboard Replacement, Battery: stap 1, afbeelding 1 van 1
    • Slide the switch on the battery cover labeled "CARD/BATT. OPEN." to the right.

    • While still holding the switch, pull the cover down, allowing it to release and open.

  2. Canon PowerShot A460 Motherboard Replacement: stap 2, afbeelding 1 van 1
    • Tilt the camera slightly to allow the batteries to fall out.

  3. Canon PowerShot A460 Motherboard Replacement: stap 3, afbeelding 1 van 1
    • Press on and release the memory card to eject it.

  4. Canon PowerShot A460 Motherboard Replacement, Front Casing: stap 4, afbeelding 1 van 1
    • Unscrew the 5mm Phillips #00 screw from the bottom of the camera.

    • Make sure to keep the different size screws organized to make reassembling the camera simpler.

  5. Canon PowerShot A460 Motherboard Replacement: stap 5, afbeelding 1 van 1
    • Unscrew the three 2mm Phillips #00 screws that are located on the bottom of the camera.

  6. Canon PowerShot A460 Motherboard Replacement: stap 6, afbeelding 1 van 1
    • Remove the 4mm Phillips #00 screw that is located on the left side of the camera, if the display screen is facing you.

  7. Canon PowerShot A460 Motherboard Replacement: stap 7, afbeelding 1 van 1
    • Take out the 4mm Phillips #00 screw under the rubber flap on the right end of the camera.

  8. Canon PowerShot A460 Motherboard Replacement: stap 8, afbeelding 1 van 2 Canon PowerShot A460 Motherboard Replacement: stap 8, afbeelding 2 van 2
    • Remove the second battery cover on the bottom of camera.

    • Take the silver battery out of the camera.

  9. Canon PowerShot A460 Motherboard Replacement: stap 9, afbeelding 1 van 3 Canon PowerShot A460 Motherboard Replacement: stap 9, afbeelding 2 van 3 Canon PowerShot A460 Motherboard Replacement: stap 9, afbeelding 3 van 3
    • Remove the 4mm Phillips #00 screw on the inside of the flap that hides the battery and memory card slots.

    • Remove the light grey, plastic piece.

    • Remove the plastic portion of the battery flap cover. The metal piece will remain attached.

  10. Canon PowerShot A460 Motherboard Replacement: stap 10, afbeelding 1 van 3 Canon PowerShot A460 Motherboard Replacement: stap 10, afbeelding 2 van 3 Canon PowerShot A460 Motherboard Replacement: stap 10, afbeelding 3 van 3
    • Slightly pull on each side of the camera. It should loosen up and come apart.

    • If it does not pull apart right away, use a little more force.

    • Do not give up!

  11. Canon PowerShot A460 Motherboard Replacement, Back Casing: stap 11, afbeelding 1 van 1
    • Remove the back case of the camera by pulling from the top.

    • Be careful when pulling off the case. There is a delicate gold ribbon connecting the bottom of the camera to the back case.

  12. Canon PowerShot A460 Motherboard Replacement, LCD Screen: stap 12, afbeelding 1 van 1
    • Remove the 4mm Phillips #00 screw from above the ribbon.

  13. Canon PowerShot A460 Motherboard Replacement: stap 13, afbeelding 1 van 1
    • Gently peel off the blue tape on the top of the LCD screen.

  14. Canon PowerShot A460 Motherboard Replacement: stap 14, afbeelding 1 van 1
    • Remove the 4mm Phillips #00 screw previously concealed by the blue tape.

  15. Canon PowerShot A460 Motherboard Replacement: stap 15, afbeelding 1 van 1
    • Gently lift the LCD screen off of the front casing by pulling up a tab on the side of the camera.

  16. Canon PowerShot A460 Motherboard Replacement: stap 16, afbeelding 1 van 1
    • Using a spudger, lift the grey tabs to allow the ribbon to slide out.

  17. Canon PowerShot A460 Motherboard Replacement: stap 17, afbeelding 1 van 1
    • Since the tabs have been lifted, the ribbon should now slide out out easily.

    • Be careful not to distort the ribbon in any way.

  18. Canon PowerShot A460 Motherboard Replacement, Motherboard: stap 18, afbeelding 1 van 1
    • Remove the 5mm Phillips #00 screw located above the small black piece on the right side of the mother board.

  19. Canon PowerShot A460 Motherboard Replacement: stap 19, afbeelding 1 van 2 Canon PowerShot A460 Motherboard Replacement: stap 19, afbeelding 2 van 2
    • Remove the 4mm Phillips #00 screw at the bottom of the black piece.

    • Detach the black piece that the screws previously held in place.

  20. Canon PowerShot A460 Motherboard Replacement: stap 20, afbeelding 1 van 1
    • Remove the 5mm Phillips #00 screw in the middle of the motherboard.

  21. Canon PowerShot A460 Motherboard Replacement: stap 21, afbeelding 1 van 1
    • Remove the 5mm Phillips #00 screw that holds the metal piece to the bottom of the camera .

  22. Canon PowerShot A460 Motherboard Replacement: stap 22, afbeelding 1 van 1
    • Remove the 5mm Phillips #00 screw that is located on the top of camera.

  23. Canon PowerShot A460 Motherboard Replacement: stap 23, afbeelding 1 van 1
    • Remove the 2mm Phillips #00 screw that is located on the far left of the motherboard.

    • Be careful not to damage the multiple adjacent orange ribbons.

  24. Canon PowerShot A460 Motherboard Replacement: stap 24, afbeelding 1 van 1
    • Remove the 5mm Phillips #00 screw near the bottom left of the motherboard.

  25. Canon PowerShot A460 Motherboard Replacement: stap 25, afbeelding 1 van 2 Canon PowerShot A460 Motherboard Replacement: stap 25, afbeelding 2 van 2
    • Using a spudger, unlock the locking mechanism that holds the lower orange ribbon in place.

    • Once unlocked, slide out the ribbon.

  26. Canon PowerShot A460 Motherboard Replacement: stap 26, afbeelding 1 van 1
    • Using a spudger, unlock the locking mechanism that holds the upper orange ribbon in place.

    • Once unlocked, slide out the ribbon.

  27. Canon PowerShot A460 Motherboard Replacement: stap 27, afbeelding 1 van 1
    • All that is required is to unsolder the few remaining wires. Then, the motherboard will be ready to be replaced!

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Tanner Coleman

Lid sinds: 01/18/13

40 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 19-42, Regan Winter 2013 Lid van Cal Poly, Team 19-42, Regan Winter 2013

CPSU-REGAN-W13S19G42

4 Leden

12 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 8

Altijd: 1,565