Repareer je spullen Gemeenschap Winkel

Canon PowerShot A2200 Button Assembly Replacement

Inleiding

This guide requires that you use a Phillips head screwdriver to remove the screws holding the buttons in place.

Wat je nodig hebt

  1. Canon PowerShot A2200 Button Assembly Replacement, Back Cover: stap 1, afbeelding 1 van 1

    • First, remove the batteries and memory card.

    • Remove the 5.0 mm black screw with a Phillips #00 screwdriver.

    • Remove the 5.0 mm silver screw with a Phillips #00 screwdriver.

    Bewerken

  2. Canon PowerShot A2200 Button Assembly Replacement: stap 2, afbeelding 1 van 1

    • Remove the 5.0 mm black screw on the right with a Phillips #00 screwdriver.

    Bewerken

  3. Canon PowerShot A2200 Button Assembly Replacement: stap 3, afbeelding 1 van 1

    • Remove the 5.0 mm screw on the left with a Phillips #00 screwdriver.

    Bewerken

  5. Canon PowerShot A2200 Button Assembly Replacement: stap 4, afbeelding 1 van 3 Canon PowerShot A2200 Button Assembly Replacement: stap 4, afbeelding 2 van 3 Canon PowerShot A2200 Button Assembly Replacement: stap 4, afbeelding 3 van 3

    • Begin taking off the back cover with a plastic opening tool.

    • Begin by wedging the plastic opening tool behind the bottom left corner of the LCD screen as shown.

    • Slide the plastic opening tool to the right, along the mating edge, to pry off the back cover.

    • Continue taking off the back cover along the left side of the camera as seen in the third picture.

    Bewerken

  6. Canon PowerShot A2200 Button Assembly Replacement: stap 5, afbeelding 1 van 3 Canon PowerShot A2200 Button Assembly Replacement: stap 5, afbeelding 2 van 3 Canon PowerShot A2200 Button Assembly Replacement: stap 5, afbeelding 3 van 3

    • Use the plastic opening tool to separate the top section of the back cover from the frame.

    • Once there is enough separation between the back cover and the frame, remove the back cover for replacement.

    Bewerken

  7. Canon PowerShot A2200 Button Assembly Replacement, Button Assembly: stap 6, afbeelding 1 van 2 Canon PowerShot A2200 Button Assembly Replacement, Button Assembly: stap 6, afbeelding 2 van 2

    • Remove the internal 4.4mm screw with a Phillips 00 screwdriver.

    • Make sure you're removing the screw circled in red, not the screw crossed out in orange.

    Bewerken

  8. Canon PowerShot A2200 Button Assembly Replacement: stap 7, afbeelding 1 van 1

    • Gently lift of the buttons for replacement. They should come off without excessive force.

    • If the buttons do not lift off easily, you may have unscrewed the wrong screw. Revert to previous step.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 3 andere bijdragers

Benjamin Gee

Lid sinds: 03/31/15

899 Reputatie

5 handleidingen geschreven

Medailles: 11

+8 andere badges

Team

Baylor, Team 4-5, Williams Spring 2015 Lid van Baylor, Team 4-5, Williams Spring 2015

BU-WILLIAMS-S15S4G5

4 Leden

11 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 7

Altijd: 641