Repareer je spullen Gemeenschap Winkel

Canon PIXMA TS3300 Ink Cartridge Replacement

Geschreven door: Meghan Reed (en 2 andere bijdragers)
  • Reacties: 1
  • Favorieten: 0

Moeilijkheid

Zeer eenvoudig

Stappen

7

Tijd vereist

3 - 5 minuten

Secties

1

Markeringen

0

Inleiding

The purpose of this guide is to inform you on how to change the ink in a printer, specifically a Canon PIXMA TS3300. The cartridge compartment is located at the from of the printer under the large Canon logo. The controls for the printer itself, the power button and lights, are located on top of the printer. In order to change the ink, you will need Canon fine cartridges. 245 is for black ink and 246 is for colored ink.

https://ij.manual.canon/ij/webmanual/Man...

Gereedschap

Geen gereedschap opgegeven.

Onderdelen

  1. Press the power button in the top left corner to turn on the printer. The light next to the button will turn green if the printer is on.

    • Press the power button in the top left corner to turn on the printer.

    • The light next to the button will turn green if the printer is on.

    Bewerken

  2. Lift the cartridge compartment located in the front of the printer to gain access on the inside of the printer. Allow for the cartridge holder to move into view.

    • Lift the cartridge compartment located in the front of the printer to gain access on the inside of the printer.

    • Allow for the cartridge holder to move into view.

    Bewerken

  3. The cartridge should be located in the center of the printer. Push down on the cartridge and pull it out.

    • The cartridge should be located in the center of the printer.

    • Push down on the cartridge and pull it out.

    Bewerken

  5. Prepare the new cartridge by peeling off the cover. Prepare the new cartridge by peeling off the cover.

    • Prepare the new cartridge by peeling off the cover.

    Bewerken

  6. Peel off the orange sticker on the left side of the cartridge. Peel off the orange sticker on the left side of the cartridge. Peel off the orange sticker on the left side of the cartridge.

    • Peel off the orange sticker on the left side of the cartridge.

    Bewerken

  7. Insert the cartridge at an angle to the cartridge holder. Push upward on the cartridge until a clicking sound is heard.

    • Insert the cartridge at an angle to the cartridge holder.

    • Push upward on the cartridge until a clicking sound is heard.

    Bewerken

  8. Close the cartridge compartment cover.

    • Close the cartridge compartment cover.

    • The printer should make a sound from the cartridges going back to their resting position.

    Bewerken
Conclusie

Allow for the cartridge holder to reposition and you are ready to print!

Auteur

met 2 andere bijdragers

Meghan Reed

Lid sinds: 16-03-21

145 Reputatie

1 Handleiding geschreven

Badges: 3

Team

Grand Valley State University, Team S3-G2, DeVasto Winter 2021 Lid van Grand Valley State University, Team S3-G2, DeVasto Winter 2021

GVSU-DEVASTO-W21S3G2

2 Leden

2 handleidingen geschreven

Één commentaar

Hi if I replace the ink cartridge with a refill the printer has an error message E16 which I know means cartridge is out of ink. How do I override this message to keep printing. I have a Canon TS3360. Jenny.

Jenny - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 20

Afgelopen 7 dagen: 130

Afgelopen 30 dagen: 551

Altijd: 5,189