Ga door naar hoofdinhoud

Canon ImageCLASS MF4350d Speaker Replacement

Wat je nodig hebt

  1. Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Front Paneling: stap 1, afbeelding 1 van 1
    • Lift the printer lid up as shown in the photo.

  2. Canon ImageCLASS MF4350d Speaker Replacement: stap 2, afbeelding 1 van 2 Canon ImageCLASS MF4350d Speaker Replacement: stap 2, afbeelding 2 van 2
    • Locate and remove the two 10mm side screws. There is one on each side.

  3. Canon ImageCLASS MF4350d Speaker Replacement: stap 3, afbeelding 1 van 2 Canon ImageCLASS MF4350d Speaker Replacement: stap 3, afbeelding 2 van 2
    • Unhook the plastic panel from the printer starting from the top.

    • You may need to wiggle the panel a bit to loosen it.

    • To remove the bottom part of the paneling gently lay the printer on its back.

    • The scanner lid needs to be supported when moving the printer

  4. Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Right Side Paneling: stap 4, afbeelding 1 van 3 Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Right Side Paneling: stap 4, afbeelding 2 van 3 Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Right Side Paneling: stap 4, afbeelding 3 van 3
    • Gently unhook the right side paneling (as looking at the printer's front face) from the printer.

    • Use a gentle back and forth motion to wiggle the hooks out.

  5. Canon ImageCLASS MF4350d Speaker Replacement, Speaker: stap 5, afbeelding 1 van 1
    • Lay printer on its left side for better access to the speaker.

    • Note: The scanner lid needs to be supported when moving the printer

  6. Canon ImageCLASS MF4350d Speaker Replacement: stap 6, afbeelding 1 van 2 Canon ImageCLASS MF4350d Speaker Replacement: stap 6, afbeelding 2 van 2
    • Locate the black 7mm screw holding the speaker in place.

    • Using a Phillips head screw driver, unscrew the 7mm screw.

  7. Canon ImageCLASS MF4350d Speaker Replacement: stap 7, afbeelding 1 van 3 Canon ImageCLASS MF4350d Speaker Replacement: stap 7, afbeelding 2 van 3 Canon ImageCLASS MF4350d Speaker Replacement: stap 7, afbeelding 3 van 3
    • Locate the red and black wires connected to the speaker.

    • Undo the white clip holding the wires in place by pinching the tab on the top.

    • Remove the red and black wires from the wire bundle.

    • When replacing the old speaker, do not touch any part of the new speaker that is not metal other than the wires. Doing so could damage the speaker.

    • Lift out the speaker

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Helena Yanez

Lid sinds: 09/29/13

455 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 13-1, Forte Fall 2013 Lid van Cal Poly, Team 13-1, Forte Fall 2013

CPSU-FORTE-F13S13G1

5 Leden

16 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 5

Altijd: 1,352