Ga door naar hoofdinhoud

Inleiding

This is a necessary procedure for replacing the bottom cover of the Canon EOS Rebel XS 35mm camera.This guide details how to remove the bottom cover and put a a bottom cover back on, whether it's the same one now fixed, or a new one.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove 6 screws using a PH000 Screwdriver.
    • Remove 6 screws using a PH000 Screwdriver.

    • Remove 1 (7mm) screw

    • Remove 5 (4mm) screws

  2. Koop geen nieuw model.

    Bespaar $10 op $50 met coupon
    SKIPANDSAVE10

    Bespaar nu

    Koop geen nieuw model.

    Take $10 off $50 with
    SKIPANDSAVE10

    Bespaar nu
  3. With your fingers, push on the bottom cover with a horizontal force until it clicks and separates.
    • With your fingers, push on the bottom cover with a horizontal force until it clicks and separates.

  4. With tweezers - although you can also use your fingers - you may remove these 5 gears (shown with colored squares around them) and place them somewhere else for the time being. They fall out easily while you're working, so this will help you stay organized.
    • With tweezers - although you can also use your fingers - you may remove these 5 gears (shown with colored squares around them) and place them somewhere else for the time being. They fall out easily while you're working, so this will help you stay organized.

Conclusie

To reassemble your device, follow these instructions in reverse order.

christiansvezia

Lid sinds: 24-10-18

1.096 Reputatie

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 1

Altijd: 26