Repareer je spullen Gemeenschap Winkel

Canon EOS 60D Rear LCD Screen Replacement

Inleiding

If you drop the camera and break the LCD screen, or if the screen just stops functioning, this guide will help you replace it.

Be sure to use a magnetic mat or small container for your screws, as they are very small and easy to misplace.

Wat je nodig hebt

  1. Canon EOS 60D Rear LCD Screen Replacement, Rear LCD Screen Dissasembly: stap 1, afbeelding 1 van 1

    • Take the LCD out of its place to expose the Phillips #PH00 screws.

    • Remove the two 2.5 mm Phillips #PH00 black screws on both sides of the LCD screen.

    • Next remove the two 3 mm Phillips #PH00 black screws near both sides of the base where the screen swivels.

    Bewerken

  2. Canon EOS 60D Rear LCD Screen Replacement: stap 2, afbeelding 1 van 1

    • Using a plastic opening tool, carefully pry off the back cover of the LCD.

    Bewerken

  4. Canon EOS 60D Rear LCD Screen Replacement: stap 3, afbeelding 1 van 2 Canon EOS 60D Rear LCD Screen Replacement: stap 3, afbeelding 2 van 2

    • Remove the 3 mm Phillips #PH00 silver screw on the side of the screen.

    • Turn the screen to remove the second 3 mm Phillips #PH00 silver screw.

    Bewerken

  5. Canon EOS 60D Rear LCD Screen Replacement: stap 4, afbeelding 1 van 1
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop

    • Using the tweezers, carefully disconnect the rear connector by pulling it away from the screen.

    Bewerken

  6. Canon EOS 60D Rear LCD Screen Replacement, Rear LCD Screen: stap 5, afbeelding 1 van 2 Canon EOS 60D Rear LCD Screen Replacement, Rear LCD Screen: stap 5, afbeelding 2 van 2

    • Remove the two 2.5 mm Phillips #PH00 silver screws using the PH00 screwdriver.

    • Using the plastic Spudger opening tool, carefully lift up on the medal tabs next to where the screws were located.

    Bewerken

  7. Canon EOS 60D Rear LCD Screen Replacement: stap 6, afbeelding 1 van 1

    • Finally, remove the LCD screen by grabbing the clear plastic tab and lifting it carefully.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Alejandro Cabrera

Lid sinds: 08/25/15

416 Reputatie

2 handleidingen geschreven

Medailles: 13

+10 andere badges

Team

USF Tampa, Team 16-6, Wollert Fall 2015 Lid van USF Tampa, Team 16-6, Wollert Fall 2015

USFT-WOLLERT-F15S16G6

3 Leden

14 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 6

Afgelopen 7 dagen: 19

Afgelopen 30 dagen: 72

Altijd: 7,685