Inleiding

The three stacked rings in the lens mount ring can be safely and easily removed.

Onderdelen

Geen onderdelen nodig.

  1. Remove the two 4.8 mm black screws above the lens on the front of the camera.
    • Remove the two 4.8 mm black screws above the lens on the front of the camera.

  2. Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
    • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

  3. Remove the 4.8 mm black screw on the left side of the camera.
    • Remove the 4.8 mm black screw on the left side of the camera.

  4. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  5. Remove the front panel by lifting it away from the camera's body.
    • Remove the front panel by lifting it away from the camera's body.

  6. Remove four 7.1 mm silver screws from lens mount ring.
    • Remove four 7.1 mm silver screws from lens mount ring.

  7. Remove outer mount ring.
    • Remove outer mount ring.

    • The silver button may detach.

  8. Remove thin gold ring.
    • Remove thin gold ring.

    • Correct orientation is pictured.

  9. Remove thin silver ring.
    • Remove thin silver ring.

    • Correct orientation is pictured.

  10. All rings are removed.
    • All rings are removed.

    • Follow pictures in reverse order to replace rings.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Antonia

Lid sinds: 17-04-11

109 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 8-8, Regan Spring 2011 Lid van Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 Leden

11 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 18

Altijd: 4,243