Ga door naar hoofdinhoud

Canon 7210 Bulb Replacement

Wat je nodig hebt

  1. Canon 7210 Bulb Replacement, Bulb: stap 1, afbeelding 1 van 1
    • Unscrew the 9mm Phillips #0 screw and remove the panel.

  2. Canon 7210 Bulb Replacement: stap 2, afbeelding 1 van 1
    • Unscrew the two 7mm Phillips #0 screws that attach the bulb to the mainframe of the projector.

  3. Canon 7210 Bulb Replacement: stap 3, afbeelding 1 van 1
    • Remove the bulb housing by gently pulling on the small silver handle located on top of the bulb housing.

  4. Canon 7210 Bulb Replacement: stap 4, afbeelding 1 van 1
    • You may replace the entire housing unit or replace the bulb itself once you remove it from the housing unit.

  5. Canon 7210 Bulb Replacement: stap 5, afbeelding 1 van 1
    • Unscrew the 9mm Phillips #0 screw.

  6. Canon 7210 Bulb Replacement: stap 6, afbeelding 1 van 1
    • Pull the wire tubing out of the plastic holder.

  7. Canon 7210 Bulb Replacement: stap 7, afbeelding 1 van 1
    • Pull the bulb out of the casing.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

William Christian

Lid sinds: 10/05/16

331 Reputatie

3 handleidingen geschreven

Team

USF Tampa, Team 9-3, Lacy Fall 2016 Lid van USF Tampa, Team 9-3, Lacy Fall 2016

USFT-LACY-F16S9G3

4 Leden

3 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 3

Altijd: 312