Ga door naar hoofdinhoud
  1. Check that the red RCA plug is connected to the red RCA jack labeled "R"              (this indicates the Right speaker).
    • Check that the red RCA plug is connected to the red RCA jack labeled "R" (this indicates the Right speaker).

    • Check that the white RCA plug is connected to the white RCA jack labeled "L" (this indicates the Left speaker).

    • To connect the ground clip, loosen the ground screw and insert the clip. Once clip is secure tighten the screw.

  2. iPhone Batterij Fix Kits

    Slechts $29.99

    Buy Now

    iPhone Batterij Fix Kits

    Slechts $29.99

    Buy Now
  3. Check the voltage selector switch to make sure its set to the proper voltage depending on your geographic location.
    • Check the voltage selector switch to make sure its set to the proper voltage depending on your geographic location.

    • Voltage selector should be set to 115 V/60 Hz in the U.S., or 230 V/50 Hz in other countries.

  4. Insert power cable into socket.
    • Insert power cable into socket.

Eindstreep

Nikolai

Lid sinds: 12-10-11

161 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 17-14, Regan Fall 2011 Lid van Cal Poly, Team 17-14, Regan Fall 2011

CPSU-REGAN-F11S17G14

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 513