Ga door naar hoofdinhoud

CR-10 V2 Print Head Teardown

Wat je nodig hebt

  1. CR-10 V2  Print Head Teardown, Teardown: stap 1, afbeelding 1 van 3 CR-10 V2  Print Head Teardown, Teardown: stap 1, afbeelding 2 van 3 CR-10 V2  Print Head Teardown, Teardown: stap 1, afbeelding 3 van 3
    • Make sure all power cables to your 3D Printer are unplugged including wall plugs (A/C) and/or USB cables.

    • Using M2 hex remove the 3 button head screws holding the print head to the X carriage plate.

    • Using M2 hex, remove the 4 screws holding the hot end fan in place (2 screws attach to the front half and the other to the rear)

    • Using M2 hex, remove 3 button head screws that secure front and rear sections together. Do not try to pull apart yet!

  2. CR-10 V2  Print Head Teardown, Teardown: stap 2, afbeelding 1 van 3 CR-10 V2  Print Head Teardown, Teardown: stap 2, afbeelding 2 van 3 CR-10 V2  Print Head Teardown, Teardown: stap 2, afbeelding 3 van 3
    • Using M2 hex, remove the 2 button head screws securing the part cooler fan. 1 attaches to the front and the other to 2 rear.

    • Pull the front half off to expose the rear section and hot end.

    • Now, treat it like an E3D V6 hot end. However, the nozzle is not V6 style.

    • The stock nozzle is MK8 just like standard CR-10/ CR-10S

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Tiny Machines 3D

Lid sinds: 11/16/19

2.970 Reputatie

14 handleidingen geschreven

Team

Tiny Machines 3D Lid van Tiny Machines 3D

Community

5 Leden

40 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 14

Afgelopen 30 dagen: 54

Altijd: 7,950