Bush Pump Head and Handle Replacement

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Inleiding

Follow this guide to remove a bush pump's head and handle for repair or replacement. Be sure to use at least two people when following this guide to prevent injury, as the pump head can be heavy.

Stap 1 Head and Handle

Bush Pump Head and Handle Replacement, Head and Handle: stap 1, afbeelding 1 van 2

Bush Pump Head and Handle Replacement, Head and Handle: stap 1, afbeelding 2 van 2

Test pump performance by pumping 40 strokes.
An effective pump should return at least 10 liters.

Vertaal

Stap 2

Remove the two pins connecting the handle to the slider.

Vertaal

Stap 3

Pull the two lever arms away from the slider.

Vertaal

Stap 4

Lift the two pins attaching the pump frame to the head and handle up, off of the pump frame.

Vertaal

Stap 5

Bush Pump Head and Handle Replacement: stap 5, afbeelding 3 van 3

Throughout this step, make sure you support the handle and head with at least three hands.
Slide the bearing rod out of the head.
Inspect the bearing rod and head for any wear or tear.