Inleiding

This short guide will show you how to properly replace the tape cassette in your label printer.

  1. Open the cassette cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling open.
    • Open the cassette cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling open.

    Voeg opmerking toe

  2. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
  3. Insert the tape cassette into the area outlined in red, making sure that it snaps into place.
    • Insert the tape cassette into the area outlined in red, making sure that it snaps into place.

    • Our device did not come with a tape cassette but one should be inserted into the red outlined area shown.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Anna McCreary

Lid sinds: 24-01-14

101 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 13-16, Regan Winter 2014 Lid van Cal Poly, Team 13-16, Regan Winter 2014

CPSU-REGAN-W14S13G16

3 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 12

Altijd: 2,257