Inleiding

In this guide, you will see why your Brother PT-1290 isn't powering up correctly or at all.

First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.
  • First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.

Voeg opmerking toe

Once the label maker is open, remove the six AAA drained batteries.
  • Once the label maker is open, remove the six AAA drained batteries.

  • If your using an AC adapter, replace the old one with the new HQRP adapter.

  • If you see white on the batteries, that would be corrosion. Be careful when disposing.

Voeg opmerking toe

  • Now place in the new six AAA batteries.

  • Make sure the batteries are correctly in and touching the golden prongs.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Lorraine Canez

Lid sinds: 25-10-14

301 Reputatie

3 handleidingen geschreven

Team

Gateway, Team 1-4, Johnson Fall 2014 Lid van Gateway, Team 1-4, Johnson Fall 2014

GCC-JOHNSON-F14S1G4

3 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 9

Altijd: 314