1. Remove the back cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling toward you.
    • Remove the back cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling toward you.

  2. Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

    Doorblader onze winkel

    Ooit iets gerepareerd? Je bent een genie.

    Deel je reparatie met #ImAGenius

    We zijn allemaal genieën

    Deel je reparatie met #ImAGenius

  3. Brother TZ tape is required for this replacement process. We don't have the tape cassette but you should be able to insert tape cassette into the red marked area as shown in the picture.
    • Brother TZ tape is required for this replacement process. We don't have the tape cassette but you should be able to insert tape cassette into the red marked area as shown in the picture.

    • Insert tape cassette into the red marked area as shown in the picture.

    • Make sure the cassette snaps into place by applying a small amount of pressure.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Haley Sweet

Lid sinds: 30-10-14

425 Reputatie

4 handleidingen geschreven

Team

Baylor, Team 4-4, Williams Fall 2014 Lid van Baylor, Team 4-4, Williams Fall 2014

BU-WILLIAMS-F14S4G4

4 Leden

4 handleidingen geschreven

So if you've replaced the cassette and it still won't print now what??

Sara Mullaney - Antwoord

This was supposed to help with model PT-450D which looks nothing like this. Please help. I can’t REMOVE / replace the cassette !!! It is STUCK inside the label printer!

af4k - Antwoord

I have a PT-1880 model and replaced the cassette, but whenever I type something to label something, the label comes out blank. Can someone help me on this? I’ve been needing help on this for a while now.

Yael Rzoque - Antwoord

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 6

Afgelopen 30 Dagen: 23

Altijd: 1,763