Inleiding

This repair guide shows how to install a new toner cartridge.

Gereedschap

Geen gereedschap nodig.

Onderdelen

  1. Press the front cover release button.
    • Press the front cover release button.

    • Keep the button pressed and pull the cover toward yourself.

  2. With the front cover in the downward position, the drum & toner unit will be visible.
    • With the front cover in the downward position, the drum & toner unit will be visible.

    • Grab the black-and-yellow handle on the unit. Lift unit up and pull it out of the printer.

    • The drum unit is the gray bottom half of the component in the picture, while the top black part is the toner cartridge.

    • Separate the toner cartridge from the drum unit by pressing down on the blue tab and gently lifting the toner cartridge up by the lift on the handle.

    • DO NOT TOUCH the roller bar on the toner cartridge, or the roller bar on the drum unit as illustrated in the pictures. This may cause a decrease in print quality.

    • Insert the toner cartridge into the new drum break by firmly sliding the cartridge into the drum unit. If installed correctly, the blue lever will be locked in a lifted position.

    • Be sure that the black nob located on the back of the toner cartridge is places inside the track located on the drum unit.

    • The third picture illustrates an incorrectly installed drum unit and toner cartridge, notice how the blue lever is down.

Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Tyler Davies

Lid sinds: 25-01-10

73 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 4-14, Forte Winter 2010 Lid van Cal Poly, Team 4-14, Forte Winter 2010

CPSU-FORTE-W10S4G14

5 Leden

5 handleidingen geschreven

thanku for this useful information on how to replace toner cartridges for Brother HL-5240...its clear with the images used....most helpful indeed!!!

can also log on to http://www.tonertree.com for some exciting products!!!!

syed - Antwoord

Thank you for this article! I helped me a lot! I have bought this model of toner http://hardware.nl/printkop/brother/ph11... but when I tried to replace it I failed. Now I did it and my printer work like a new one. Thank you one more time!

Scott Waschlerner - Antwoord

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 21

Altijd: 10,923