Repareer je spullen Gemeenschap Winkel

Brentwood TS-292B Browning Dial Circuitboard Replacement

Inleiding

This guide will show how to remove and replace the browning dial/circuit of the Brentwood TS-292B.

Wat je nodig hebt

  1. Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: stap 1, afbeelding 1 van 3 Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: stap 1, afbeelding 2 van 3 Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: stap 1, afbeelding 3 van 3

    • Remove the five screws indicated using a Philips head screwdriver.

    Bewerken

  2. Brentwood TS-292B Browning Dial Circuitboard Replacement: stap 2, afbeelding 1 van 2 Brentwood TS-292B Browning Dial Circuitboard Replacement: stap 2, afbeelding 2 van 2

    • Pull hard on the browning lever until it detaches from the toaster.

    • It will take some force to pull it off.

    • Once the tab is off, lift up on the housing to remove it from the toaster.

    Bewerken

  4. Brentwood TS-292B Browning Dial Circuitboard Replacement: stap 3, afbeelding 1 van 1

    • Once the housing has been pulled upwards, carefully uplug the wire connecting the browning dial circuit board to the main circuit board.

    Bewerken

  5. Brentwood TS-292B Browning Dial Circuitboard Replacement: stap 4, afbeelding 1 van 2 Brentwood TS-292B Browning Dial Circuitboard Replacement: stap 4, afbeelding 2 van 2

    • There are four screws on the circuit board for the browning dial.

    • Unscrew each of them with a Philips head screwdriver to detach the board and remove the board and dial from the toaster housing.

    Bewerken

  6. Brentwood TS-292B Browning Dial Circuitboard Replacement: stap 5, afbeelding 1 van 2 Brentwood TS-292B Browning Dial Circuitboard Replacement: stap 5, afbeelding 2 van 2

    • There are two holes on the board where the pin from the browning dial can align.

    • Refer to the images if you are having trouble finding them.

    • Replace the browning dial by inserting the pin on the dial into one of the holes indicated.

    • Replace the entire circuit board if need be.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Elly Ayala

Lid sinds: 09/21/18

739 Reputatie

5 handleidingen geschreven

Medailles: 5

+2 andere badges

Team

University of North Texas, Team S8-G7, Riccardelli Fall 2018 Lid van University of North Texas, Team S8-G7, Riccardelli Fall 2018

UNT-RICCARDELLI-F18S8G7

4 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 4

Altijd: 219