Ga door naar hoofdinhoud

Inleiding

Following this guide will show you how to access and replace the motherboard. The Braven BRV-HD Battery Replacement is a prerequisite for this guide.

  1. Braven BRV-HD Motherboard Replacement, Battery: stap 1, afbeelding 1 van 2 Braven BRV-HD Motherboard Replacement, Battery: stap 1, afbeelding 2 van 2
    • Placing the device on its back with the BRV-HD logo facing up, remove the eight 5mm hexagon 2.0 screws on the front panel.

    • Make sure the device is turned off before starting.

  2. Braven BRV-HD Motherboard Replacement: stap 2, afbeelding 1 van 1
    • Lift the front panel off of the speaker using a plastic opening tool.

  3. Braven BRV-HD Motherboard Replacement: stap 3, afbeelding 1 van 2 Braven BRV-HD Motherboard Replacement: stap 3, afbeelding 2 van 2
    • Placing the device with the back panel facing up, remove the eight 5mm hexagon 2.0 screws from the back panel.

  4. Braven BRV-HD Motherboard Replacement: stap 4, afbeelding 1 van 1
    • Lift the back panel off of the device with a plastic opening tool.

  5. Braven BRV-HD Motherboard Replacement: stap 5, afbeelding 1 van 2 Braven BRV-HD Motherboard Replacement: stap 5, afbeelding 2 van 2
    • Turning the device on its side, unscrew the four 15mm hexagon 2.0 screws on the charging port panel.

  6. Braven BRV-HD Motherboard Replacement: stap 6, afbeelding 1 van 1
    • Remove the outer rubber flap and the plastic side port panel.

  7. Braven BRV-HD Motherboard Replacement: stap 7, afbeelding 1 van 2 Braven BRV-HD Motherboard Replacement: stap 7, afbeelding 2 van 2
    • Place the device on its front.

    • Loosen the four 12mm Phillips screws in the four corners with a J1 screwdriver.

    • Loosen the two 8mm Phillips screws in the center with a J1 screwdriver.

    • These screws are difficult to reach and will require a screwdriver extension piece.

  8. Braven BRV-HD Motherboard Replacement: stap 8, afbeelding 1 van 1
    • Pull off the rubber sleeve surrounding the speaker using your hands.

    • There is adhesive binding the sleeve to the speaker and force will be required to remove the sleeve.

  9. Braven BRV-HD Motherboard Replacement: stap 9, afbeelding 1 van 1
    • Lift the black covering off of the speaker using both hands.

    • Loose screws that you were unable to remove with the screwdriver will be removed when you lift off the black covering.

  10. Braven BRV-HD Motherboard Replacement: stap 10, afbeelding 1 van 1
    • Remove the four 12mm Phillips screws securing the two battery brackets with a J1 screwdriver.

    • Move any wires aside to have better access to the screws securing the battery.

  11. Braven BRV-HD Motherboard Replacement: stap 11, afbeelding 1 van 1
    • Remove the two brackets that hold down the battery using your hands.

  12. Braven BRV-HD Motherboard Replacement: stap 12, afbeelding 1 van 2 Braven BRV-HD Motherboard Replacement: stap 12, afbeelding 2 van 2
    • Use the plastic opening tool to lift up the battery.

    • Remove the battery using your hands.

    • The wires connecting the battery to the motherboard are still plugged in. Avoid pulling on the battery or these wires may break.

  13. Braven BRV-HD Motherboard Replacement: stap 13, afbeelding 1 van 1
    • Disconnect the wire attaching the battery to the motherboard.

    • There is green glue on the wire ports preventing the wires from falling out. Peel and remove this glue as necessary.

    • Be careful when pulling out the wires from their ports. The metal stems attached to the ports can break. A spudger or tweezers may help.

  14. Braven BRV-HD Motherboard Replacement, Motherboard: stap 14, afbeelding 1 van 3 Braven BRV-HD Motherboard Replacement, Motherboard: stap 14, afbeelding 2 van 3 Braven BRV-HD Motherboard Replacement, Motherboard: stap 14, afbeelding 3 van 3
    • Locating the two screws on either side of the motherboard, unscrew the two 8 mm Phillips head screws using a J1 Phillips head screw driver.

  15. Braven BRV-HD Motherboard Replacement: stap 15, afbeelding 1 van 3 Braven BRV-HD Motherboard Replacement: stap 15, afbeelding 2 van 3 Braven BRV-HD Motherboard Replacement: stap 15, afbeelding 3 van 3
    • Slide out the motherboard using your hands.

    • Unplug all the wires attaching the motherboard to the device.

    • Remove and replace motherboard.

    • Some wires are glued to the motherboard with a green glue. Remove the glue before removing the wires.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Courtney Van Buren

Lid sinds: 15-09-16

321 Reputatie

2 handleidingen geschreven

Team

CSU Fullerton, Team 1-5, Bruce Fall 2016 Lid van CSU Fullerton, Team 1-5, Bruce Fall 2016

CSUF-BRUCE-F16S1G5

5 Leden

5 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 11

Altijd: 688