Ga door naar hoofdinhoud

Inleiding

If your speaker sound is muffled or broken, the speaker cone may be damaged. To solve this problem, you can remove the old speaker cone and replace it with a new part. This guide will show you how to access the speaker cone and remove it. The guide will include the necessary prerequisites needed.

Onderdelen

Geen onderdelen opgegeven.

  1. Braven BRV-1s Speaker Cone Replacement, Outer Casing: stap 1, afbeelding 1 van 1
    • To remove the outer case, remove 4 phillips screws (Phillips #00 headtype, 9.3mm long)

  2. Braven BRV-1s Speaker Cone Replacement: stap 2, afbeelding 1 van 1
    • Using a metal spudger, gently pry the side of the defective case.

  3. Braven BRV-1s Speaker Cone Replacement: stap 3, afbeelding 1 van 1
    • Still using the metal spudger, continue to work your way around the outer case.

  4. Braven BRV-1s Speaker Cone Replacement: stap 4, afbeelding 1 van 1
    • Remove the broken outer case. Replace with used/new out case.

    • Note that unless properly sealed with glue, the speaker will no longer be water resistant.

  5. Braven BRV-1s Speaker Cone Replacement, Speaker Cone: stap 5, afbeelding 1 van 1
    • To remove the speaker cone plate, remove 10 phillips screws (Phillips #00 headtype, 9.3mm long)

  6. Braven BRV-1s Speaker Cone Replacement: stap 6, afbeelding 1 van 1
    • Using a metal spudger, gently pry the side of the defective speaker cone plate.

    • Remember to pry all around the side of the speaker cone plate.

    • Keep in mind that the adhesive will make it difficult to pry the plate off. To loosen the adhesive, heat the plate with a device such as a hair dryer.

  7. Braven BRV-1s Speaker Cone Replacement: stap 7, afbeelding 1 van 2 Braven BRV-1s Speaker Cone Replacement: stap 7, afbeelding 2 van 2
    • Remove the broken speaker cone plate. Replace with used/new out plate.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Leanne Abel

Lid sinds: 06-03-17

101 Reputatie

1 Handleiding geschreven

Team

IUPUI, Team S2-G2, Harley Spring 2017 Lid van IUPUI, Team S2-G2, Harley Spring 2017

IUPUI-HARLEY-S17S2G2

4 Leden

3 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 9

Altijd: 614