Ga door naar hoofdinhoud

Braven BRV-1s Outer Casing Replacement

Wat je nodig hebt

  1. Braven BRV-1s Outer Casing Replacement, Outer Casing: stap 1, afbeelding 1 van 1
    • To remove the outer case, remove 4 phillips screws (Phillips #00 headtype, 9.3mm long)

  2. Braven BRV-1s Outer Casing Replacement: stap 2, afbeelding 1 van 1
    • Using a metal spudger, gently pry the side of the defective case.

  3. Braven BRV-1s Outer Casing Replacement: stap 3, afbeelding 1 van 1
    • Still using the metal spudger, continue to work your way around the outer case.

  4. Braven BRV-1s Outer Casing Replacement: stap 4, afbeelding 1 van 1
    • Remove the broken outer case. Replace with used/new out case.

    • Note that unless properly sealed with glue, the speaker will no longer be water resistant.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Cody Sprague

Lid sinds: 03/01/17

101 Reputatie

1 Handleiding geschreven

Team

IUPUI, Team S2-G2, Harley Spring 2017 Lid van IUPUI, Team S2-G2, Harley Spring 2017

IUPUI-HARLEY-S17S2G2

4 Leden

3 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 7

Altijd: 1,064