Ga door naar hoofdinhoud

Bowers and Wilkins P5 Headphones Audio Cable Replacement

  1. Bowers and Wilkins P5 Headphones Audio Cable Replacement, Earpads: stap 1, afbeelding 1 van 1
    • To start, make sure that the headphones are disconnected from any audio source.

  2. Bowers and Wilkins P5 Headphones Audio Cable Replacement: stap 2, afbeelding 1 van 1
    • Fold the earpads flat.

  3. Bowers and Wilkins P5 Headphones Audio Cable Replacement: stap 3, afbeelding 1 van 2 Bowers and Wilkins P5 Headphones Audio Cable Replacement: stap 3, afbeelding 2 van 2
    • Pull off the earpad.

    • When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.

  4. Bowers and Wilkins P5 Headphones Audio Cable Replacement, Audio Cable: stap 4, afbeelding 1 van 1
    • Take the audio cable out of the clip.

  5. Bowers and Wilkins P5 Headphones Audio Cable Replacement: stap 5, afbeelding 1 van 1
    • Pull out the audio cable.

  6. Bowers and Wilkins P5 Headphones Audio Cable Replacement: stap 6, afbeelding 1 van 1
    • Headphones remain.

Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Ashley Ryan

Lid sinds: 03/25/12

5.591 Reputatie

3 handleidingen geschreven

Team

Master Techs Lid van Master Techs

Community

321 Leden

1.524 handleidingen geschreven

Één opmerking

I replaced cable once and all was fine. Now left side only not working. Could it be something else or just time for a new cable?

Jayrosen - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 32

Altijd: 9,688