Ga door naar hoofdinhoud

Bose SoundDock Portable v2 Remote Battery Replacement

Wat je nodig hebt

  1. Bose SoundDock Portable v2 Remote Battery Replacement, Remote Battery: stap 1, afbeelding 1 van 1
    • Using a quarter, turn the battery cover 1/8th of a turn counterclockwise.

  2. Bose SoundDock Portable v2 Remote Battery Replacement: stap 2, afbeelding 1 van 2 Bose SoundDock Portable v2 Remote Battery Replacement: stap 2, afbeelding 2 van 2
    • Remove cover and battery. The new battery should be placed with the positive (flat) side facing up.

    • The correct battery for your remote is a CR2032. You may also use a DL2032.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Brodie Sutherland

Lid sinds: 04/14/15

303 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 4-1, Maness Spring 2015 Lid van Cal Poly, Team 4-1, Maness Spring 2015

CPSU-MANESS-S15S4G1

4 Leden

5 handleidingen geschreven

Één opmerking

We have a Bose Wave radio w/remote. This remote is not the one shown here with a screw for the battery compartment. It's the type w/a sliding holder for the battery on the south end (bottom of the battery). Someone went to replace the battery and shoved the holder in upside down I believe. Consequently the holder will not come out all the way.

There must be a way to get it out without forcing it. There's a pinch clip you have to either squeeze or move to the left to disengage it from the locked position and free it up. Any ideas as to how to accomplish this? We appreciate a reply back so this would make our Christmas better.

Merry Christmas & Happy Holidays! Cheers!

asbirdiesingh - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 12

Afgelopen 7 dagen: 31

Afgelopen 30 dagen: 127

Altijd: 13,235