Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

This guide will help you replace the IR receiver in your Bose speaker.

Onderdelen

Geen onderdelen opgegeven.

  1. Gently pry the front mesh cover off of the sound dock using a metal spudger. The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart. The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart.
    • Gently pry the front mesh cover off of the sound dock using a metal spudger.

    • The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart.

  2. Nintendo Switch-kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch-kits

    A quick fix to get back in the game

    Shop Switch Kits
  3. Using a T15 torx screwdriver, remove the 8mm screw holding the IR sensor to the speaker system.
    • Using a T15 torx screwdriver, remove the 8mm screw holding the IR sensor to the speaker system.

  4. Using tweezers or your fingers, gently remove the ribbon cable connecting the IR sensor to the system.
    • Using tweezers or your fingers, gently remove the ribbon cable connecting the IR sensor to the system.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Evan Low

Lid sinds: 14-04-15

476 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 4-1, Maness Spring 2015 Lid van Cal Poly, Team 4-1, Maness Spring 2015

CPSU-MANESS-S15S4G1

4 Leden

5 handleidingen geschreven

Één commentaar

Hi my sounddock blocked suddenly and the green led always on. Do you now something about please... :(

jose - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 63

Altijd: 4,440