Ga door naar hoofdinhoud

Inleiding

Use this guide to remove the battery from your Blu Studio Selfie. Before starting this guide, check to make sure you have the required tools and that your phone is powered off.

Onderdelen

Geen onderdelen opgegeven.

  1. Make sure your phone is powered off.
    • Make sure your phone is powered off.

    • Turn the front of the phone away from you.

    • Run your fingers along the sides of the phone to identify where the case can be pulled apart.

  2. Insert the flat end of your plastic opening into the crevice you found along the side of the phone.
    • Insert the flat end of your plastic opening into the crevice you found along the side of the phone.

    • Gently apply pressure until you feel the back case pop free of the phone.

    • Continue the previous two steps around the rest of the phone until the case is fully removed.

  3. Identify the crevice at the bottom of the battery. There should be enough space for you to fit your fingernail between the battery and the phone.
    • Identify the crevice at the bottom of the battery.

    • There should be enough space for you to fit your fingernail between the battery and the phone.

    • Gently lift the battery free of the phone.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Stacy Kam

Lid sinds: 20-01-16

618 Reputatie

5 handleidingen geschreven

Team

USF Tampa, Team 10-1, Remmell Spring 2016 Lid van USF Tampa, Team 10-1, Remmell Spring 2016

USFT-REMMELL-S16S10G1

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 6

Altijd: 1,205