Ga door naar hoofdinhoud

Inleiding

Follow this guide to install a SIM card in the Blackberry Pearl 8100.

Gereedschap

Geen gereedschap opgegeven.

Onderdelen

Geen onderdelen opgegeven.

  1. Before working on the phone, be sure that the phone is turned off. Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.
    • Before working on the phone, be sure that the phone is turned off.

    • Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.

    • Remove the battery located directly below back panel.

  2. Slide the larger of the two metal casings upward (in the direction pointed to as “unlock”).
    • Slide the larger of the two metal casings upward (in the direction pointed to as “unlock”).

  3. Lift the metal casing.
    • Lift the metal casing.

    • Insert an SD Card.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Robert Cronin

Lid sinds: 08-04-10

520 Reputatie

6 handleidingen geschreven

Team

Cal Poly, Team 34-57, Forte Spring 2010 Lid van Cal Poly, Team 34-57, Forte Spring 2010

CPSU-FORTE-S10S34G57

5 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 6

Altijd: 8,726