Inleiding

This Repair guide will walk you through the steps on how to replace a RIM Blackberry 8700c logic board.

Onderdelen

Geen onderdelen nodig.

  1. Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone.
    • Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone.

    • Set the cover aside. The battery will now be exposed.

    Voeg opmerking toe

  2. Remove the battery by pulling back on the notch on top edge of the battery.
    • Remove the battery by pulling back on the notch on top edge of the battery.

    • Set the battery aside.

    Voeg opmerking toe

    • Unscrew and remove all four T6 Torx screws.

    Voeg opmerking toe

    • Pull the back cover of the phone off and set it aside.

    Voeg opmerking toe

    • Unscrew and remove all 4 T6 Torx screws.

    Voeg opmerking toe

    • Lift and remove inner back cover and set aside.

      • A small side piece may fall away but is simple to reattach.

    • Remove logic board by gently lifting it off of the front cover of the phone.

      • New logic board can now simply be set in place.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

arlebrun

Lid sinds: 02-12-09

1 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 18-4, Maness Fall 2009 Lid van Cal Poly, Team 18-4, Maness Fall 2009

CPSU-MANESS-F09S18G4

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 3,099