Repareer je spullen Gemeenschap Winkel

Black and Decker WP900 Exterior Casing Replacement

Inleiding

This page gives instructions for disassembling the Black and Decker WP900 6-Inch Orbital Waxer and Polisher to where the external casing can be removed from all internal workings.

Wat je nodig hebt

  1. Black and Decker WP900 Exterior Casing Replacement, Exterior Casing: stap 1, afbeelding 1 van 1

    • Using the plastic tool, detach the handle tab as shown.

    • Make sure the device is unplugged.

    Vertaal

  2. Black and Decker WP900 Exterior Casing Replacement: stap 2, afbeelding 1 van 1

    • Using the Phillips #1 screwdriver, unscrew all of the screws. There should be 8-30mm screws to remove.

    • Be sure to keep track of where each screw was placed in the device for later reassembly.

    Vertaal

  4. Black and Decker WP900 Exterior Casing Replacement: stap 3, afbeelding 1 van 3 Black and Decker WP900 Exterior Casing Replacement: stap 3, afbeelding 2 van 3 Black and Decker WP900 Exterior Casing Replacement: stap 3, afbeelding 3 van 3

    • Remove the back panel of the external casing, leaving all internal components resting in the front panel.

    • Remove the black handle from the main external casing.

    Vertaal

  5. Black and Decker WP900 Exterior Casing Replacement: stap 4, afbeelding 1 van 1

    • Using the Phillips #1 screwdriver, remove the two 22mm screws.

    • The metal bracket will detach with the two screws.

    • Using the Flathead 3/32" screwdriver, remove two 22mm screws.

    Vertaal

  6. Black and Decker WP900 Exterior Casing Replacement: stap 5, afbeelding 1 van 2 Black and Decker WP900 Exterior Casing Replacement: stap 5, afbeelding 2 van 2

    • Gently pull the power cord out from the control module.

    • Remember, when reassembling the device, the black wire should be on the top.

    Vertaal

  7. Black and Decker WP900 Exterior Casing Replacement: stap 6, afbeelding 1 van 1

    • Firmly grasping the motor dislodge the internal components from the frontal external casing.

    • Once the motor has been removed, the external casing can now be replaced.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

David Hutchings

Lid sinds: 03/28/16

101 Reputatie

1 Handleiding geschreven

Medailles: 2

Team

IUPUI, Team 8-8, Wilson Spring 2016 Lid van IUPUI, Team 8-8, Wilson Spring 2016

IUPUI-WILSON-S16S8G8

4 Leden

4 handleidingen geschreven

Één opmerking

Hello, this is Adam Kinnett from Group 7. You have done an excellent job on your photos as well as the descriptions and formatting.

**One of your Wiki pages on the search says "Back and Decker".

Adam Kinnett - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 14

Altijd: 889