Inleiding

Before replacing knobs you will have to disassemble oven to take off the knobs and faceplate.

Onderdelen

Geen onderdelen nodig.

Make sure that the toaster is unplugged before you begin.
  • Make sure that the toaster is unplugged before you begin.

  • Turn the toaster upside down and remove the two Phillips #4 1 cm screws attached to the side panels.

Voeg opmerking toe

Pull down and out to remove side panels from the unit
  • Pull down and out to remove side panels from the unit

  • Repeat for the other side.

Voeg opmerking toe

  • Remove the bottom vent.

  • This should come off fairly easy.

Voeg opmerking toe

  • Remove the two Phillips #4 1 cm screws that connect the bottom panel to the unit.

Voeg opmerking toe

  • Remove the crumb tray (bottom metal panel) from the toaster unit.

Voeg opmerking toe

  • Remove the aluminum strip on the bottom of the unit.

Voeg opmerking toe

  • Remove knobs by pulling up on them.

Voeg opmerking toe

  • Unhook the bottom of the display panel from the toaster unit.

  • It will be a little tough to pry off, but don't be afraid to be forceful.

Voeg opmerking toe

  • Begin to detach the back panel from the toaster unit and unhook the rest of the display panel.

  • This will also be a little tough to get off, but don't be afraid to be forceful.

Voeg opmerking toe

Eindstreep

Jonathan

Lid sinds: 18-09-12

120 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 2-10, Propen Fall 2012 Lid van Cal Poly, Team 2-10, Propen Fall 2012

CPSU-PROPEN-F12S2G10

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 8

Altijd: 2,528