Repareer je spullen Gemeenschap Winkel

Black and Decker LDX 120C Gear Replacement

Inleiding

If the drill isn't working effectively it might be because of the gears, so this guide will show a step by step process on how to access the gear and to change necessary components.

Wat je nodig hebt

  1. Black and Decker LDX 120C Gear Replacement, Outer Case: stap 1, afbeelding 1 van 1

    • For this guide we will need to use a 1.0 mm phillips #1 screw.

    • There are a total of thirteen screws that need to be removed in order to open the drill and access the interior components.

    Vertaal

  2. Black and Decker LDX 120C Gear Replacement: stap 2, afbeelding 1 van 1

    • Remove the four screws on the back top side of the drill.

    Vertaal

  3. Black and Decker LDX 120C Gear Replacement: stap 3, afbeelding 1 van 1

    • Remove the four screws that connect the chuck to the drill.

    Vertaal

  4. Black and Decker LDX 120C Gear Replacement: stap 4, afbeelding 1 van 1

    • Remove the five screws on the front side of the drill.

    Vertaal

  5. Black and Decker LDX 120C Gear Replacement: stap 5, afbeelding 1 van 1

    • Gently grab both sides of the drill casing, and separate both sides from each other.

    Vertaal

  6. Black and Decker LDX 120C Gear Replacement: stap 6, afbeelding 1 van 1

    • At this point you should be able to separate both as illustrated.

    Vertaal

  8. Black and Decker LDX 120C Gear Replacement: stap 7, afbeelding 1 van 1

    • Now all the components of the drill are visible and can be accessed.

    Vertaal

  9. Black and Decker LDX 120C Gear Replacement, Gear: stap 8, afbeelding 1 van 1

    • After following the prerequisite guide you will be able to access the interior components of the drill.

    Vertaal

  10. Black and Decker LDX 120C Gear Replacement: stap 9, afbeelding 1 van 1

    • Gently remove the top part (motor and chuck) from the rest of the drill.

    Vertaal

  11. Black and Decker LDX 120C Gear Replacement: stap 10, afbeelding 1 van 1

    • Make sure you do that with care so that the connection doesn't get damaged.

    Vertaal

  12. Black and Decker LDX 120C Gear Replacement: stap 11, afbeelding 1 van 1

    • To be able to get into the gears you will need to separate the motor from the rest.

    • And then you will be able to access the gears which is located between the motor and the chuck.

    Vertaal

  13. Black and Decker LDX 120C Gear Replacement: stap 12, afbeelding 1 van 1

    • Twist the gauge to change between the gear.

    • If you don't hear a clicking sound then check the gears.

    Vertaal

  14. Black and Decker LDX 120C Gear Replacement: stap 13, afbeelding 1 van 1

    • Twist the gear and see if the three gears rotate without jamming.

    Vertaal

  15. Black and Decker LDX 120C Gear Replacement: stap 14, afbeelding 1 van 1

    • Check if any gear is chipped or broken in any way.

    • If it is then you will need to change the broken gear.

    Vertaal

  16. Black and Decker LDX 120C Gear Replacement: stap 15, afbeelding 1 van 1

    • Using the spudger place it under the gear as illustrated.

    Vertaal

  17. Black and Decker LDX 120C Gear Replacement: stap 16, afbeelding 1 van 1

    • The gear will remove with just a little amount of force.

    Vertaal

  18. Black and Decker LDX 120C Gear Replacement: stap 17, afbeelding 1 van 1

    • The gear has been removed and now can be replaced by another gear.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

jeffrey zakka

Lid sinds: 02/09/16

735 Reputatie

6 handleidingen geschreven

Medailles: 14

+11 andere badges

Team

USF Tampa, Team 11-5, Cheng Spring 2016 Lid van USF Tampa, Team 11-5, Cheng Spring 2016

USFT-CHENG-S16S11G5

5 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 16

Altijd: 1,953