Repareer je spullen Gemeenschap Winkel

Black and Decker JS660 Blade Holder Replacement

Inleiding

The jigsaw blade may become loose or is not fastening correctly when using the blade. This guide will identify the problem and show the user how to fix and interchange the holder.

Wat je nodig hebt

  1. Black and Decker JS660 Blade Holder Replacement, Base: stap 1, afbeelding 1 van 2 Black and Decker JS660 Blade Holder Replacement, Base: stap 1, afbeelding 2 van 2

    • Unscrew the eight screws to open up the jigsaw.

    Vertaal

  2. Black and Decker JS660 Blade Holder Replacement: stap 2, afbeelding 1 van 1

    • Use a screwdriver to remove the first screws securing the base to the jigsaw.

    • Remove the second screw.

    • Remove the base of the jigsaw.

    Vertaal

  4. Black and Decker JS660 Blade Holder Replacement: stap 3, afbeelding 1 van 2 Black and Decker JS660 Blade Holder Replacement: stap 3, afbeelding 2 van 2

    • With the old jigsaw base off, replace it with the new base by following the steps in the reverse order.

    • Assemble the base on a steady surface.

    Vertaal

  5. Black and Decker JS660 Blade Holder Replacement, Blade Holder: stap 4, afbeelding 1 van 2 Black and Decker JS660 Blade Holder Replacement, Blade Holder: stap 4, afbeelding 2 van 2

    • You will need to take out the entire blade clamp shown.

    • The plastic part is fragile, easy to break

    Vertaal

  6. Black and Decker JS660 Blade Holder Replacement: stap 5, afbeelding 1 van 3 Black and Decker JS660 Blade Holder Replacement: stap 5, afbeelding 2 van 3 Black and Decker JS660 Blade Holder Replacement: stap 5, afbeelding 3 van 3

    • Showing the entire blade clamp removed from the device.

    • Apply some oil grease if dry/needed

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 4 andere bijdragers

Andrew Khouri

Lid sinds: 02/08/16

468 Reputatie

4 handleidingen geschreven

Medailles: 11

+8 andere badges

Team

USF Tampa, Team 6-2, Eyestone Spring 2016 Lid van USF Tampa, Team 6-2, Eyestone Spring 2016

USFT-EYESTONE-S16S6G2

4 Leden

4 handleidingen geschreven

Één opmerking

What a great website… I could never have known how to replace the blade holder… Or that I could get the correct parts…I got the replacement part. Then removed the old one, and replaced the new one. NO problem at all.. Thanks to Andrew and this website… With out it, would have to pay some one at a big price, and wait to have it fixed, as would have to send it off for the repair.. Or….. Just throw it away…

Thanks every one… I will share this site for sure…

navy1aedon - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 5

Altijd: 3,389