Repareer je spullen Gemeenschap Winkel

Black and Decker GS720 Hedge trimmer blade replacement

Inleiding

This guide focusses on the Black&Decker GS720; the series number can be found on the sticker on the side of the product, next to the logo.

When the hedge trimmer is used extensively or in a wrong way, the blade can become blunt which makes the product useless. Replacing the blade without care can be dangerous, especially when handling sharp blades. This guide could also be used on how to remove the blade in case of maintenance.

Wat je nodig hebt

  1. Black and Decker GS720 Hedge trimmer blade replacement, Blade: stap 1, afbeelding 1 van 3 Black and Decker GS720 Hedge trimmer blade replacement, Blade: stap 1, afbeelding 2 van 3 Black and Decker GS720 Hedge trimmer blade replacement, Blade: stap 1, afbeelding 3 van 3

    • Remove the five 1.4mm Philips #2 screws from the bottom using the Philips screwdriver

    • Remove the metal cover strip and the blade from the machine

    • When you remove the blade, the gears beneath can fall out. Take care not to loose any of the gears. If the gears do fall out, they can be put back easily again (see image 3).

    Vertaal

  2. Black and Decker GS720 Hedge trimmer blade replacement: stap 2, afbeelding 1 van 2 Black and Decker GS720 Hedge trimmer blade replacement: stap 2, afbeelding 2 van 2

    • Loosen the nuts using the wrench

    • You might need another tool (such as pliers or a wrench) and/or person to help you to prevent the bolt turning as you rotate the nut.

    • Remove the upper strip to access the middle blade.

    • Remove the middle blade.

    Vertaal

  4. Black and Decker GS720 Hedge trimmer blade replacement: stap 3, afbeelding 1 van 2 Black and Decker GS720 Hedge trimmer blade replacement: stap 3, afbeelding 2 van 2

    • Lubricate the new blade and place it upon the other blade.

    • Take care to align the blade the correct way, with the sharp edge facing the other blade (see picture 2).

    Vertaal

  5. Black and Decker GS720 Hedge trimmer blade replacement: stap 4, afbeelding 1 van 1

    • When reassembling the blades again, take care to place the spacers in the designated slots in the blade to provide smooth operation of the blades.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 5 andere bijdragers

Alma

Lid sinds: 12/05/16

137 Reputatie

1 Handleiding geschreven

Medailles: 3

Team

Delft University of Technology, Team 1-3, Flipsen Fall 2016 Lid van Delft University of Technology, Team 1-3, Flipsen Fall 2016

TUD-FLIPSEN-F16S1G3

2 Leden

1 handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 45

Afgelopen 30 dagen: 107

Altijd: 7,863