Inleiding

This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.

  1. Make sure the blender is turned off and unplugged from all power.
    • Make sure the blender is turned off and unplugged from all power.

    • Remove the glass jar from the base of the blender.

    Voeg opmerking toe

  2. Remove the top lid from the blender jar.
    • Remove the top lid from the blender jar.

    Voeg opmerking toe

    • Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.

    • Take care not to cut yourself on the blades.

    Voeg opmerking toe

    • Lift the rubber washer straight up to remove it from the blade assembly.

    • Take care not to cut yourself on the blades.

    Voeg opmerking toe

    • Lift the blades from the bottom cap.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Andrew

Lid sinds: 04-10-12

170 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 6-34, Regan Fall 2012 Lid van Cal Poly, Team 6-34, Regan Fall 2012

CPSU-REGAN-F12S6G34

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 17

Altijd: 3,077