Repareer je spullen Gemeenschap Winkel

Bissell Zing 2156A Rear Wheel Replacement

Inleiding

Like most canister vacuums, this unit uses wheels to help keep it mobile for a variety of floor types. The Bissell Zing 2156A uses three total wheels: one swivel wheel in front and two side wheels. If the vacuum's wheels are stuck, replacing these can be a great way to get it going again.

Hair or other debris can get behind these wheels, and by their nature, these wheels are often right where messes are, so gloves might be advisable. Otherwise, this is an easy repair!

  1. Bissell Zing 2156A Rear Wheel Replacement, Rear Wheel: stap 1, afbeelding 1 van 1

    • Remove the dust tank, so the vacuum can lie upside down easily.

    • Press the grey button while pulling up.

    Bewerken

  3. Bissell Zing 2156A Rear Wheel Replacement: stap 2, afbeelding 1 van 1

    • Flip the vacuum upside down.

    Bewerken

  4. Bissell Zing 2156A Rear Wheel Replacement: stap 3, afbeelding 1 van 3 Bissell Zing 2156A Rear Wheel Replacement: stap 3, afbeelding 2 van 3 Bissell Zing 2156A Rear Wheel Replacement: stap 3, afbeelding 3 van 3

    • Place your hand inside between the wheel and vacuum and pry the wheel off.

    • Repeat with the other side.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 4 andere bijdragers

Terrance

Lid sinds: 02/14/24

280 Reputatie

3 handleidingen geschreven

Medailles: 5

+2 andere badges

Team

University of Memphis, Team 3-4, Sneed Spring 2024 Lid van University of Memphis, Team 3-4, Sneed Spring 2024

UM-SNEED-S24S3G4

4 Leden

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 9

Altijd: 69