Inleiding

This guide will show you the steps necessary to remove the capacitor in the Bendix Magneto. A worn out capacitor can cause an excessive RPM drop on the left or right aircraft magneto.

Onderdelen

Geen onderdelen nodig.

Use a #2 Flathead screw driver to remove the five screws on the body of the magneto.
  • Use a #2 Flathead screw driver to remove the five screws on the body of the magneto.

Voeg opmerking toe

Locate the two screws on the back of the magneto that holds the capacitor in place.
  • Locate the two screws on the back of the magneto that holds the capacitor in place.

Voeg opmerking toe

Use a #2 Flathead screw driver to remove the screws.
  • Use a #2 Flathead screw driver to remove the screws.

Voeg opmerking toe

Remove the Capacitor and replace it.
  • Remove the Capacitor and replace it.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Kelsi English

Lid sinds: 26-09-12

381 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 1-2, Propen Fall 2012 Lid van Cal Poly, Team 1-2, Propen Fall 2012

CPSU-PROPEN-F12S1G2

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 5

Afgelopen 7 Dagen: 16

Afgelopen 30 Dagen: 34

Altijd: 2,512