Ga door naar hoofdinhoud

Beiens Cartoon RC Race Car Remote Control Antenna Replacement

Wat je nodig hebt

  1. Beiens Cartoon RC Race Car Remote Control Antenna Replacement, Remote Control Antenna: stap 1, afbeelding 1 van 1
    • Flip the remote control and unscrew all the six 6.5 mm screws with the Phillips #00 screwdriver.

  2. Beiens Cartoon RC Race Car Remote Control Antenna Replacement: stap 2, afbeelding 1 van 1
    • Pull the device apart to find the connection between the antenna and the white wire.

  3. Beiens Cartoon RC Race Car Remote Control Antenna Replacement: stap 3, afbeelding 1 van 1
    • Unscrew the 4.5 mm screw that attaches the antenna in place.

  4. Beiens Cartoon RC Race Car Remote Control Antenna Replacement: stap 4, afbeelding 1 van 1
    • Replace the old antenna with a new one. Attach the new antenna to the white wire and screw it in place.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Amber Ashley

Lid sinds: 10/01/15

329 Reputatie

4 handleidingen geschreven

Team

USF Tampa, Team 1-6, Leahy Fall 2015 Lid van USF Tampa, Team 1-6, Leahy Fall 2015

USFT-LEAHY-F15S1G6

3 Leden

8 handleidingen geschreven

Één opmerking

Where can I get a replacement antenna for the remote control?

eziegler92 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 25

Altijd: 794