Ga door naar hoofdinhoud

Beats Solo 3 Motherboard Replacement

Wat je nodig hebt

  1. Beats Solo 3 Motherboard Replacement, Motherboard: stap 1, afbeelding 1 van 1
    • Use an opening tool to open the headband at the color seam.

    • The audio board is located inside the "Left" ear cup.

  2. Beats Solo 3 Motherboard Replacement: stap 2, afbeelding 1 van 2 Beats Solo 3 Motherboard Replacement: stap 2, afbeelding 2 van 2
    • Use a pair of tweezers to carefully remove the yellow polyimide tape that is attached to the morherboard.

  3. Beats Solo 3 Motherboard Replacement: stap 3, afbeelding 1 van 1
    • There will be three bundled cables attached to the motherboard. Carefully pull them out of each prong.

    • Make sure to take note of which one belongs where for reassembly later.

  4. Beats Solo 3 Motherboard Replacement: stap 4, afbeelding 1 van 1
    • Use a Phillips #00 screwdriver to remove the four screws that hold the motherboard in place.

    • The cap on the outside of the headphones will fall off once the final screw is removed. Do not fear that something broke. Simply reattach during reassembly phase

  5. Beats Solo 3 Motherboard Replacement: stap 5, afbeelding 1 van 1
    • Finally, remove and replace the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Jakub Karl

Lid sinds: 03/21/22

186 Reputatie

1 Handleiding geschreven

Één opmerking

no suena el altavoz izquierdo do los cascos en modo inalambrico

supongo que es placa base

?puede decirme donde puedo comprar placa base?

l1967e - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 18

Afgelopen 7 dagen: 71

Afgelopen 30 dagen: 317

Altijd: 6,439