Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

The frame cover protects the battery and the inside components of the device.

Onderdelen

Geen onderdelen opgegeven.

  1. Pry the back cover from the bottom of the phone, pulling outwards and upwards.
    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

  2. Fully remove the cover and set aside in a safe place.
    • Fully remove the cover and set aside in a safe place.

  3. Manta schroevendraaierset

    112 bitjes voor elke reparatie.

    Upgrade Your Toolbox

    Manta schroevendraaierset

    Upgrade Your Toolbox
  4. Remove all the nine 2mm screws using the JIS #00 Screwdriver.
    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

  5. Pry the frame off using the spudger pulling upwards going to different areas around the device.
    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

Conclusie

To reassemble your device, follow these instructions in reverse order. Ensure that all sides of the frame cover are firmly snapped on before replacing the screws.

Één andere persoon heeft deze handleiding voltooid.

Tione Gooden

Lid sinds: 21-09-18

269 Reputatie

2 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 5

Altijd: 97